IA2020 Proceedings page

Advancing exposure assessment of air pollutants for environmental risk management
Improving Assessment of Indoor PM2.5 Exposures for an Environmental Justice Community Using a Low-Cost PM Sensor
Air Cleaner Technologies For Improving IAQ
The role of technical standards in improving IAQ
A parameter study for the optimization of Wire-plate Charging and electrostatic precipitator
Air cleaning and filtration
An Experimental Study on the Evolution of Collecting Incense Particles by Nanofiber Filter Media
Room Temperature Oxidative Decomposition of Indoor Formaldehyde (HCHO) by Supporting Pt on Defective TiO2
A new test method of air cleaners for gaseous pollutants by developed gas generator
Nano-MnO2 coated PU sponges for high-efficiency electrostatic particle filtration with an ultra-low pressure drop
TiO2-coated PU sponges with ultra-low pressure drop for efficient electrostatic multifunctional air filtration: PM and formaldehyde
Evaluation of VOCs Adsorption Characteristics by the Cation Exchange Capacity of Yellow loess
Sustainable purification techniques for the removal of airborne endocrine disruptors in personal care products' antimicrobials
Analysis of suitable regeneration air temperature for ammonia removal in Clean Air Heat Pump (CAHP) system
Evaluation of the PM2.5 Reduction Performance of Air purifier Considering Human breathing
Treatment of wood processing VOC emissions by gas-to-particle conversion process
Catalytic oxidation of VOCs degradation by using Pt/TiO2 : effect on TiO2 substrate phases
Removal of VOCs from ventilation air by non-thermal plasma and bipolar ionization assisted gas-to-particle conversion
Performance Test of Nitrogen Oxide Reduction of TiO2 Photocatalyst Coating Materials
Improvement of electrostatic precipitator by optimizing discharge and dielectric coating on repellent electrode plates
Removal of indoor multi-component VOCs by a laser drilling modified flexible adsorption board: Enable fast mass transfer.
3D printable multilayer adsorption coating for indoor gaseous pollutants removal
Design and Implementation of an In-situ Thermally Regenerated Adsorption Module for Reducing VOC Emission from Furniture Industry
Assessment of six commercially-available sorptive materials for indoor air quality improvement
Effect of Support Characteristics on the Surface Properties of TiO2 Supported Manganese Catalysts for Formaldehyde Decomposition at Room Temperature
New biological filter for the removal of air pollutants
Comparing the microstructure of activated carbon to improve the adsorption performance of chemical filters in microelectronic cleanrooms
A Study on the Field Application of Fine dust and Bioaerosol Reduction Efficiency in Hospitals Using Air Cleaner
Simulation Study on the Effectiveness of Negative Ion Purifier in Removing Ammonia Gas in a Bathroom
Efficiency and fit testing of filtering respirators entering Lithuanian market during COVID-19 pandemics
Filtration performance evaluation during a life cycle of the automotive cabin air filter
Heat-resistance and high filtration performance bag filter by PTFE nanoparticle coating via air-controlled electrospray
Air cleaning and filtration 1: Filtration
The In-situ and Laboratory Efficiency of New and Used Residential HVAC Filters
Evaluation of particle filtration control by unidirectional flow valve type device
On-site Measurement and Optimization of Clean Air-Supply System in Industrial Cleanrooms
Numerical Simulation of the Sterilization Effect with UV Lamps in Air-conditioning Systems
Experimental and numerical study of velocity profiles at the vicinity of HVAC pleated filters during clogging
Quantitative Filter Forensics Evaluation of Particulate Matter
Extended Service Life of Activated Carbon Filters for Ozone Removal Due to Regeneration
Air cleaning and filtration 3: Novel mechanisms
Comparing the efficacy of UVC-LED and low-pressure mercury lamps upper-room UVGI systems for air disinfection
Development of a two-stage electrostatic preciptator for indoor air purification
A case study on toluene removal by PDMS-modified metal organic frameworks compared to activated carbon
Reducing indoor air pollution through applied botanical biofiltration
Experimental Tests of CAM Plants and Hydrogels for Outdoor Air Pollutant Filtration Systems
Air cleaning and filtration 4: Materials
Energy-efficient air filtration media for removal of volatile chemicals
Electrospun nanofiber air pollution filters: An experimental study
Modelling and Experimental Studies of P-xylene Adsorption Behaviour onto Activated Carbon
The influence of indoor air cleaners on the oxidative potential and sources of metals in indoor, outdoor, and personal exposure of school aged children to PM2.5 in suburban Shanghai, China
Facile hydrophobic modification strategy on hydrophilic metal organic frameworks for improved toluene capture
Removal Effect of Formaldehyde and Tvoc by Two Kinds of Photocatalyst with Different Doping Modification in Rooms
Building simulation and CFD
Exposure to Indoor Air Pollution Across Socio-economic Groups: A review of the literature and a modelling methodology
A benchmark test for the isothermal backward-facing step flow
CFD study of the flow field driven by interacting jets in a generic enclosure
CFD analysis of natural ventilation through parallel opening windows in a large educational building
Precision temperature control for an irregular cavity with internal heat source on a large-scale scientific facility using CFD simulations
Simulation of Gas Leakage in Open Kitchen
Using dynamic air curtain to improve the capture performance of range hoods
Simulating Residential Energy Consumption and Indoor Air Quality under Various Ventilation Control Strategies
Evaluation of energy flexibility from building thermal mass under different control events: A case study of a nearly zero energy office building
Design of envelope for low-energy office buildings in hot and humid zone: An optimization based on uncertainty and sensitivity analysis
Parameterization of vegetation drag effect in CFD simulations and its effects on downstream wind environment around building
Multi-parameter optimization on energy saving technologies in nearly zero energy apartment in Nanjing, China: a simulation analysis
Comparison of solar heat pump water heating systems between parallel and serial arrangement: Simulation using TRNSYS
CFD simulation of particle removal by a kitchen range hood with whole house ventilation system in Korean residential housing unit
A review of CFD simulation and analysis of particulate matter in subway stations
Energy retrofit using phase change material considering climate conditions
Influence of a moving bathroom door on the dispersal of air contamination
A study on the optimal application of phase change materials considering the climatic conditions and position in building elements
CFD Modeling of Particle Transport and Analysis of Dust on the International Space Station
Natural gas dispersion characteristics with the effect of natural ventilation in residential space
Simulation research on optimization of compound system in a passive residential building in severe cold area, China
Effect of Room Airflow induced by Air Conditioner on COVID Dispersion
Application of greenhouse in the improvement of the air quality and thermal comfort levels
Building simulation and CFD 1: Indoor air pollutants and infection
Prediction of transient particle transport in transient indoor airflow by integrated fast fluid dynamics and Markov chain model
Infection control and sustainability measures for a healthcare facility
Analysis of Infection Risk with Agent Simulation - Inhibiting Infection Risk with Surgical Mask and Corridor Width
Leakage of exhaled contaminant from airborne infection isolation room due to medical staff walking motion
Validation of IAQ Models for Predicting VOC and PM Indoor Concentrations
A Fractional Convective Mass Transfer Model For Simulating Formaldehyde Emission
Building simulation and CFD 3: Energy and indoor environment
Inverse design of an indoor environment using a filter-based topology method with experimental verification
Prediction and Analysis of Indoor Pollutant Concentration and Thermal Comfort of a Residential Building
Indoor climate measurements and datasets for building simulations
IAQ-prediction in multi-zone reduced order BES-models
Challenges in ventilation for the operating theatres of the future (modelling, sensing & control): Making the invisible visible
Impact of the surgical lamp design on the airflow and contamination level in an operating room: a numerical assessment
Chemical Emissions and Observations in the Indoor Environment
Sources, Chemical Transformations and Fate of Organic Trace Gases in Different Indoor Environments
Progress in Understanding the Organic Composition of Residential Air
A review of ventilation in bedrooms and sleep quality
Chemistry and transformations 1: Chemistry Model
A Monte Carlo simulation for insights into indoor air chemistry
An open source model for investigating indoor air chemistry
Modeling indoor aerosol inorganic chemical processes with ISORROPIA
Sensitivity analysis of indoor air concentrations to ambient air concentrations with the Simplified Indoor Air Chemistry Simulator
Comparison of the Simplified Indoor Air Chemistry Simulator (SIACS) with other indoor air chemistry models
Chemistry and transformations 2: Indoor Sources
What are the main non-reactive sinks of terpenes? Comparison of various indoor surfaces
Indoor reactive nitrogen chemistry: New approaches and new homes
Chemistry and transformations 3: Ozone and Oxidants
Interfacial adsorption of gaseous PAEs on micro polyurethane fiber with activated carbon coating: Enhancement by electrostatic discharging
Indoor Ozone Chemistry in a Real-World Study of Urban Apartments in the U.S.
The Impact of Mass Transfer Coefficients on Ozone Deposition Velocity in Typical Residential Units
The illumination of painted surfaces in the presence of gaseous NO
Chemistry and transformations 4: Aerosol and Particle
Ethanolamine Influence on Secondary Organic Aerosol from ?-Pinene Ozonolysis
Chamber study on migration of DNOP from the source to dust with accumulation of surface dust
Computing cooking organic mass emissions from HOMEChem
Observations of Low-volatility Siloxanes in Airborne Particles During Oven Use at a Residential Test House
Phthalate uptake by aerosol particles and humans ? time resolved analysis with aerosol mass spectrometry
Oxidized primary organic aerosol and secondary organic aerosol formation initiated by chlorine oxidation of indoor pollutants during bleach cleaning
Concentration and exposure
Concentration of PM10, Heavy Metals, VOCs in the air and relation to upper respiratory diseases in Korea
A Study on the Characteristics of Multi-use Facilities in Seoul and Gyeonggi-do Using IOR of Particulate Matter(PM10)
Indoor Radon Exposure in China from 2000 to 2020
Prediction of Phthalates concentration in house dust based on back propagation neural network in residential buildings in Shanghai
Developing relationships between diffusive uptake rate and chemical properties for VOC sampling
Micro Gas Preconcentrator for Detection of Low-Concentration Formaldehyde under Low-Temperature Condition using Thermoelectric Cooling Element
Highly time resolved measurement of indoor speciated organic aerosols in a typical Hong Kong residential apartment utilizing a Thermal desorption Aerosol Gas chromatography ? Time of Flight ? Mass Spectrometry
Phthalates in household dust in relation to decorating materials and furniture in Baotou, China
Comparison of the effect of 1-hour and 8-hour average ozone concentrations on the human health
Ultrasensitive VOC Measurements in University Offices: Insights into Variability of Indoor VOC Concentrations and Indoor Air Quality
The Effect of Metabolic CO2 Source Distribution in a Mechanically Ventilated Classroom on the CO2 concentration in the breathing zone
Toxicity Implication of metal bound size-resolved PM: Importance of the built environment
Exposure factors and inhalation exposure to consumer spray products in Korea
Indoor air quality in healthcare and care facilities: chemical pollution and microbiological contamination
Quantifying volatile organic compounds and their sources in residences in Ahmedabad and Gandhinagar, India, and in suburban Shanghai, China
Investigating the Distribution of PM Concentrations at Highway Rest Area
Mixtures of Odorous VOC and the Impact on Odour Intensities
Evaluation of Natural Radioactivity of Building Materials Considering Indoor Radon
Characterization of indoor and outdoor exposure level to hazardous air pollutants at various living environments by canister sampling
Determination of the damage function considering equilibrium partitioning of semivolatile organic compounds and the application for indoor health risk assessment
Infant exposure to SVOCs in sleep microenvironments
VOC target list in densely occupied university buildings: a field study
Exposure to Second-hand tobacco smoke and health impact assessment of consumption transition from conventional cigarettes to new nicotine containing devices
Size distribution characterization and comparison of different daily used aerosol sources in indoor air
Concentration and exposure 2: VOCs
An Evaluation of Flame Retardant Exposure Routes from Upholstered Furniture
Improving mechanistic models of dermal uptake of SVOCs from clothing
A Rapid Method for Characterizing Emissions of SVOCs from Consumer Products and Its Application to Human Exposure Assessment
Semivolatile organic compounds in French school samples
Assessment of indoor air quality in office buildings: new volatile organic compounds, semi-volatile organic compounds, metals, and oxidative potential
Surgical smoke harms air quality in operating rooms
Effects of co-exposure of formaldehyde and benzene on life time of Drosophila melanogaster based on mortality
Concentration and exposure 3: Indoor Particle Sources
Humidifiers and Humans: inhalation exposure to metals aerosolized from ultrasonic humidifiers within indoor air environments
Human exposure to PM2.5 in mainland China
Particulate matter exposure of chefs in professional kitchens
Non-targeted analyses of school indoor settled dust by gas chromatography coupled to mass spectrometry (GC/MS)
Longitudinal assessment of human personal cloud effect associated with carbon dioxide and particulate matter
Indoor particulate matter concentration and exposure in South African residential communities
Concentration and exposure 4: Influences from Outdoors
Exposure to Air Pollutants in Urban Indoor Walkways
Measuring air quality in daycare centers offering outdoor sleeping facilities in an urban environment
Contributions of outdoor and indoor sources to residential indoor UFP concentrations
Integrated impact of solar radiation and turbulence on passive and reactive pollutant dispersion in 2D street canyon
Concentration and exposure 5: Transportation, Public Spaces, and Other Environments
Impacts of Electronic Cigarettes Usage on Indoor Air Quality of Vape Shop and Nearby Business
Accumulation of Per- and Polyfluoroalkyl Substances (PFAS) in Clothing in Indoor Environments
Indoor Air Quality Monitoring in Mobility Situations by car around Paris using low-cost technologies: methodology and evaluation of performances compared to standard methods
Investigation of Indoor Air Quality in Bank Offices
Correlation between Nicotine Metabolites Levels in Urine and Blood for Korean Active Smokers
A case-control study on indoor air quality and respiratory allergy symptoms in school-age children
Concentration and exposure 6: Airborne Infection and Transmission
Effect of nozzle-based personalized ventilation on airborne disease transmission between occupants
Performance of Personalized Ventilation on Bioaerosol Deposition and Inhalation of Cough Droplets
Developing Demand Driven Ventilation Criteria for Airborne Infection Control in Congregate Spaces
Home quarantine: a numerical evaluation of aerosol-like virus spread in a single-family house
Chemical Exposure to Disinfection Byproducts interacting on Personal Face Masks
Identifying effective ventilation strategies to reduce COVID-19 infection risk indoors thanks to a multiroute transmission multi zonal model
Concentration and exposure 7: Residential Environments
Real-time characterization of VOC exposure in a few new residential apartments in Beijing
Human Exposure to Semi-Volatile Organic Compounds (SVOCs) in Social Housing Apartments
Occurrences and characterization of organophosphate flame retardants in indoor air and dust: a multi?location households study
Impact of Precautionary Measures on Indoor Radon Levels in Retrofit Homes
Household air pollution in Sub-Saharan Africa ? assessment and characterization of exposure in Ethiopian homes
Source apportionment of indoor exposures to >200 VOCs at two California residences
Development of Indoor Air Quality Control and Safety Management Technology for Public-use facilities
Multi-sensor platforms for monitoring indoor air quality in multi-use facilities
Evaluation System for Indoor Optical Particulate Matter Sensors
A Study on the Present Condition of Indoor Air Quality in Multi-use Facilities and the Direction of Improvement
Visualization of indoor air quality data for effective management of air quality in multi-use facilities
The Survey about satisfaction of the indoor environment in Nursing home
Indoor air quality, thermal comfort, and energy use analysis using real-time multiple monitoring data: A childcare-center case study
Low-cost Management Measures for the Indoor Air Quality (IAQ)
Health effect and epidemiology
Effects of Windows Open and Closed on the Indoor Environment and Sleep Quality
Influence of indoor temperature cumulative effect on respiratory disease?related emergency department visits among older adults in Taiwan
Effect of carbon dioxide concentration on respiratory parameters of occupants
A study on the health impact indoor thermal environments have on homes and occupants lifestyle using multiple logistic regression analysis
Investigation of the flow-field around the face when wearing loose-fitting hood
Disinfection of the surfaces of the fan in a stand type air conditioner using an ultraviolet light emitting diode
A Novel Device to Isolate Immune-compromised Patients on ICU Beds
Are LEED-certified apartments more satisfying? What do tenants say?
Concentration of Phthalate Metabolites in urine of Chinese Children and its Association with Asthma and Allergy
A Study on Health Risk Assessment for Oral Exposure of Phenol by Chemical Accident
Health Risk Assessment of Exposure to formaldehyde following an Accidental leakage
Analysis of linkage between cardiovascular disease and pollutant concentrations in Seoul, Korea
Effects of home environment, perceptions of odors and sensations of dryness on sick building syndrome symptoms in China
Preliminary results of district wide renovation ? effects on IEQ
Analysis of Time-Activity Patterns by Age and Season of Residents in Large Cities
Analysis of Indoor/Outdoor particulate matter inside a retirement community in S?o Paulo, Brazil: The role of particles on health risk.
A Priority-index Approach to Propose Potential Binary Biocidal Mixtures for Synergistic Pulmonary Toxicity
How can improve mixture risk characterization methods for combined exposures to biocidal mixtures?
Exposure to frying aerosol and its cardiovascular impacts
Characterizing Coffee Home Roasting and Grinding Emissions Using Low Cost Sensors
Interaction effect of air pollution and environmental temperature on childhood asthma
Health effect and epidemiology 1: Exposure and health effects in house
Non-combustible air fresheners tested in an experimental house: exposure and health risk assessment
Mold, dampness and health in unplanned urban houses in the hot and humid climate of Indonesia
Present States of Indoor Air Quality and Health in Newly Constructed High-Rise Apartment in Major Cities of Indonesia
Classification and Characterization of Exposure Rating in Humidifier Disinfectants through Calculation of PHMG Reference Concentration
The mediation effect of indoor air quality on health: A comparison of homeowners and renters
The impact of cooking nanoparticles on the human brain activity during electric stove frying
Health effect and epidemiology 4: Chemical agents and health effects
Disease burden of indoor volatile organic compounds (VOCs) in China
The impact of outdoor formaldehyde on indoor environment of public buildings
Modeling DEHP and its metabolism in a bodys organs and tissues through different intake pathway into human body
Exploring Exposure to Aldehydes in E-Cigarettes
Health effect and epidemiology 5: Indoor air quality and cognitive health
Effects of the total floor area of an air-conditioned office building on building-related symptoms: characteristics of winter and summer
Effects of Rest during Work in the Staff Stations on Subjective Fatigue, Mental Health and Productivity for Nurses
Associations between Indoor Air Quality and Cognitive Health: A randomised masked trial in the tropics
The effects and Possible Mechanism of Co-exposure to Low Concentration Formaldehyde and PM2.5 on Airway Inflammation in Mice
Indoor air quality and adult asthma severity in Chicago, IL
Demographics, housing characteristics, indoor environmental factors, and asthma severity among adults in Chicago, IL
IEA-EBC Annex 78: Substituting Ventilation by Gas Phase Air Cleaning
Substituting Ventilation by Gas Phase Air Cleaning: Pros & Cons
IEQ monitoring and data analytics
Indoor Environmental Quality in Open-Plan vs. Traditional Office Settings
Relationships between Multi-Layer Wooden Materials Emission and VOC level in New Renovated Residences in Taiwan
Exploring the relationship between multiple indoor air pollutants and objectively-measured sleep quality in university students
Prediction of Sick Building Syndrome (SBS) using Semi-Quantitative Score via Environmetrics and Pattern Recognition Techniques
Evaluation if the Effect of Particulate Matter Reduction in School Space Using IoT-based Air Purifying Plants
Electrospun Nanofibrous Membranes for Sampling of Fine Fraction of Particulate Matter
Structural Equation Modelling of Occupant Satisfaction with Indoor Environmental Quality of Office Buildings in Singapore
A study on a wide range of NDIR analyzer to measure CO2 in doors
Reliability and performance of real-time gas sensors for continuous monitoring of indoor TVOC concentrations
An overview of the ALIVE project: Assessing Indoor Environmental Quality and Energy Efficiency In a range of Naturally-Ventilated Buildings: A Multi-Disciplinary Approach
Field Study of Air Change Rate Distribution of Inpatient Rooms in Two Hospitals in Shenzhen
IEQIoT : Indoor Environmental Quality Analysis For Worker Health In The Factory Using IoT Environmental Sensors
Data-analytics Based Monitoring Approach for Indoor Air Quality of Urban Railway System
Monitoring Indoor Air Quality for Eco-Feedback and Energy Efficiency in Residential Buildings
Comparative analysis of the particulate matter (PM) concentrations monitoring in some indoor spaces from Bucharest, Romania
Towards thermal comfort prediction using environmental monitoring assessment using smartwatches and cohort matching
Radon monitoring and occurrence characteristics of gypsum board and phosphate neutralized gypsum
Differences In Thermal Comfort State Transitional Time Among Comfort Preference Groups
Post-Occupancy Evaluation with focus on IEQ and Productivity Metrics in Office Buildings
Characterization of Indoor Air Quality in a Government Office Building using Principal Component Analysis
Application Research on IoT-Based Sensor for Monitoring Spatio-Temporal Patterns of Indoor Air Quality
IEQ monitoring and data analytics 2: Building environmental data analytics
Collecting Long-Term Indoor Environmental Quality Data in Highly Energy-Efficient Dwellings
A Data-driven Study on the Association of Indoor Air Quality, Thermal Comfort Factors and Student Academic Performance
Continuous monitoring of indoor environmental quality: variation explained by building clustering
Using Big Data from IoT connected AHU for cross-sectional surveys
Detection of occupancy presence and activities in a simulated office environment
Occupant behavior detection from environmental data and appliance electricity consumptions using machine learning
IEQ monitoring and data analytics 4: Indoor air quality and human exposure
Quit Blaming ASHRAE Standard 62.1 for 1000 ppm CO2
Associating different indoor air contaminant levels with various ventilation systems in K-12 classrooms
Development of real-time PM2.5 exposure monitoring model of urban population using air quality monitoring sensor
Indoor Air Quality in Modern US Detached Homes With and Without Mechanical Ventilation
Predicting fine and coarse PM concentrations in well-mixed indoor air for a large office building using regression models
Automating Source Apportionment of PM2.5 Time-Resolved Measurements using a Data-Driven Machine-Learning Approach
Indoor Air Modelling and (Quantitative Microbial) Risk Assessment ? Whats Missing and Where Do We Need to Go Next?
Indoor Surface Touch Behaviors in a Graduate Student Office
Indoor Chemical Human Emissions and Reactivity (ICHEAR)
The Indoor Chemical Human Emissions and Reactivity project (ICHEAR): An experimental overview
Human ammonia emission rates under various indoor environmental conditions
CO2 Emission Rates from Humans at Light Activity (ICHEAR project)
Emission rates of volatile organic compounds (VOCs) from human beings: breath, skin and whole body characterizations
Ozone-initiated single-digit nanoparticle emissions from humans
Human emissions of fluorescent biological aerosol particles: Influence of personal and environmental conditions
Total OH reactivity of Human Beings
Understanding Endogenous and Exogenous Volatile Organic Compounds in Human Breath with respect to Indoor Air Quality
Indoor particles and microbes
Indoor Air PM10 and Exposure Risks Influenced by Specific Student-Athlete Activities during Early Evening Secondary School Wrestling Matches
Numerical study on the ventilation performance of local exhaust for the removal of surgical smoke in an operating room
The Effect of Temperature on Airborne Release of Ochratoxin A from Cultivated Aspergillus niger
Indoor particle size and concentration dynamics associated with episodic emission events
Link between Occupants and Airborne Particulate Matters in Residential Buildings
How suitable is tracer gas as a surrogate of exhaled droplet nuclei for studying airborne transmission in the built environment
Effects of Relate Humidity on Size Distribution and Hygroscopic Growth of Submicron Particles in Indoor Environment
The Effect of the Sampling Time on the Collection Efficiency and Bioactivity of Airborne Fungi for Biosampler
Particulate matter in the indoor air of a cafeteria: composition and health risks
Higher inflammation in mice caused by airborne particles collected in Swedish occupied residences compared to outdoor particles
In silico epitope prediction, expression and immunogenicity analysis of Dermatophagoides mite group 1 (Der 1)
A Method to Accurately Assess Indoor Particle Deposition Loss Rate
Characteristics of fine particle concentration according to cooking activity in residential environment
A Study on Portable Axial Wet Cyclone for the Fungi Collection
Nut and bolt microfluidic system for on-site detection of environmental particles
Effect of Sampling Time on Bacterial Collection Efficiency and Bioactivity for Biosampler
Fungal Concentration and Diversity in the Five Storage Rooms of Unsterilized Records in the Nara Repository of National Archives of Korea
Indoor vacuum cleaner emissions: particle size distributions and health impact
Emissions from the ironing process: influence on particle size distributions
Evaluating the accuracy of optical particle counters for estimating size-resolved particulate matter mass concentrations in occupied homes
The Adverse Associations of Indoor Air Quality and Thermal Conditions on Student Absenteeism in 144 Elementary Classrooms in The Midwestern United States
Characterization of bacterial community using 16s rRNA sequencing in classroom floor dust of 50 public schools in a large city
Full House: Microbial and Nonmicrobial Volatile Organic Compounds Competing for Residency in Indoor Environments at Cycling Relative Humidity
Numerical investigation of droplets and droplet nuclei dispersion by the indoor ventilation
Quantitative Aerobiologic Analysis of an Influenza Human Challenge-Transmission Trial
Indoor particles and microbes 1: Microbial sources
Relationships between airborne microorganism levels and ambient air temperature and relative humidity in hospitals: A systematic review and meta-analysis
Diel Cycle of Indoor Bioaerosol Dynamics in the Tropics as a Proxy for Unpolluted Indoor Environments
The microbiota of damaged and non-damaged building materials
Relationships between Fungal Communities in Puerto Rican Homes after Hurricane Maria
Bacterial and Fungal Ecology and Emissions Associated with Air Conditioner Cooling Coils
Relative humidity levels associated with increases in microbial growth and MVOC emissions in carpet and drywall
Relative humidity level influences the morphology of fungal growth in carpet
Indoor particles and microbes 4: Transport and Transmission
Modelling the influence of room orientation and care type on differences in norovirus exposure via an air-surface interface transmission route
A Study of Short-Range Bioaerosol Deposition onto near Surfaces from a Cough
Diurnal trends of indoor and outdoor fluorescent biological aerosol particles in Singapore
Characterizing the influence of boundary flow and surface type on microbe fate and transport in built spaces
Particle Size Distribution of Residential HVAC Filter Dust
Indoor particles and microbes 5: Sampling and Evaluation
Airborne microbial contamination in indoor environments ? comparison of sampling technologies for enumeration by cultivable method
Developing novel approaches for identifying a microbial signal of moisture damage in buildings
Multiplate air passive sampler to measure deposition rate of airborne microorganisms over time.
Personal Bioaerosol Sampler Combined with Adenosine Triphosphate Bioluminescence Assay
CLEAR Homes Project: A Participatory Science Approach to Study Indoor Air Quality
Does evidence support measuring spore counts to identify dampness or mold in buildings? A review of the literature
Improved quantification of fungi in indoor environmental samples: free dust compared to filter-bound dust
Kitchen Ventilation Requirements for High Performance Homes
Analysis to Inform a Range Hood Capture Efficiency Standard for California New Homes
Thermal environment of occupant and exposure to fine particles during cooking process in a Chinese urban residential kitchen
Performance of Over-The-Range Microwave Exhaust Fans Compared to Range Hoods
MOCCIE2: MOdelling Consortium for the Chemistry of Indoor Environments 2
Modeling Indoor Surface Chemistry Using Kinetic Multilayer Models
Distribution of ozone-initiated skin oxidation products emission rates among 20 volunteers
Modeling the Build-up of SVOCs on Impervious Surfaces
How Does Indoor Air Chemistry Affect Outdoor Air Pollution?
Predicting indoor aerosol water content and phase state: Impacts of re-gion, season, and mechanical system operation
Computational Fluid Dynamics (CFD) Modeling of Indoor Ozone and OH Chemistry
Other topics
Modeling the impact of relative humidity on squalene ozonolysis products
Measurements and modeling of the spectral properties of sunlight at the irradiated volume and surface of an indoor environment: The impact on the oxidation capacity
Characterizing Emissions from Heating Simulated Cannabis Extracts
A physical-chemical coupling model for characterizing the reaction of ozone with squalene in the family house
Low-cost sensors for indoor air quality: performance assessment in simulated real conditions
Evaluation and classification of 264 low-cost dust sensors in laboratory using an exponentially decaying particle concentration
Development of Air Quality Monitor that monitors indoor and outdoor air quality to provide an Air Quality Index and to indicate appropriate timing of ventilation
Low-cost sensors for indoor air quality: performance assessment in laboratory conditions
Use of low-cost particle sensors in estimating outdoor penetration and indoor generation of PM2.5 over a large geographic area
Development of Highway Climate Prediction Map considering Climate Change Scenario
Analysis of Factors Affecting the Vaporization Efficiency of LNG Vaporizing Station
Explainable Artificial Intelligence applied to household transportation energy consumption
Simulation analysis on buildings using shape stabilized PCM wallboard for improving thermal performance
A Study on Climate Change Adaptation Project and Evaluation on the Highway
Short-term solar irradiance forecast from satellite-derived cloud index
Assessing greenhouse gas reduction through adopting photovoltaic energy in residential sector
Outcome of radon provisions on radon levels in homes
Demystifying Regulations and Dynamic Standard Testing Methods for Formaldehyde Emissions from Wood Products
Indoor Thermal Environment after a Disaster for Business Continuity Plan
Beehive Indoor Air Measurement for Bee Colony Diagnostics
Investigation of the Correlation between Self-reported Smoking Behavior and Biomarkers Level in Korean Active Smokers
Indoor environmental quality influences cognitive functions: A critical review
SMART-RENO-IEQ: Evaluation of energy retrofits impacts on indoor thermal and air quality of single-family houses
Analysis on the external window airtightness and the effect of fresh air filtration system on the prevention and control of PM2.5: A case study of Chinese residential buildings
Reducing the microbial problems in the residential bathroom
Green Building Materials (GBM) Policies and Efficiency Assessment of Indoor Air Quality Improvement for Usage of GBM in Taiwan
Other Topics 1: Smart sensor and indoor environment
Rising damp in historical buildings in tropical climate: A case study of hygro-thermal analysis
Implementation of wireless IAQ sensing network for real-time monitoring in a university campus in Hong Kong
Monitoring Household Air Pollution Caused by Open Fire Stoves in Rwanda
Long term evaluation of the low-cost PM2.5 sensors at five urban air monitoring stations in Taiwan
Integrated Wearable System for Monitoring Personal Health and Environmental Conditions
Developing a Test Protocol for Measuring Office Productivity in Different Indoor Environments
Other Topics 3: Energy and climate change
The ALDREN-TAIL index, an indicator of indoor environmental quality (IEQ) in buildings addressing health and well-being
Teaching the Concept of Adaptive Thermal Comfort in Building Design Education
Integrated assessment across building and city scales using a system-of-systems framework
Environmental impact assessment of hybridGEOTABS system on the EU building stock based on dynamic modelling
Retrofitting for Energy Performance Improvement of Historic Building for Future Climates Change
Sources and emissions
UNDERSTANDING TRENDS OF AIR POLLUTION CONCENTRATION IN KIGALI, RWANDA BASED ON SATELLITE OBSERVATIONS
Indoor PM2.5 of Likely Outdoor Origin from Adjacent Freeway and Parking Lot during Early Evening Secondary School Wrestling Matches
Numerical simulations on buoyancy-driven plumes from various sphere-attached heating sources
Air Quality and Naphthalene Concentrations in a Temporary Storage Facility for Museum Collections Damaged in a Tsunami
Health-based evaluation of VOC emissions from construction products using the EU-LCI concept: the case of dipropylene glycol mono-n(t)butyl ether (DPGBE)
Impact of photocatalytic paints on indoor VOCs in a full-scale study: focus on regulated and reactive compounds
A Review of Experimental Methods for Measuring VOCs Emitted from Human
Toluene Adsorption Performance of Adsorptive Finishing Materials in an Urban Residential Apartment
Development and validation of an efficient procedure for the analysis of emissions of very volatile organic compounds (VVOCs) from construction products
New particle formation (1-3nm) in preschools
Study on micro chamber Method of emission phthalate from Building Materials
Field study of 2-ethyl-1-hexanol in office buildings and the effect of sub-floor materials on the emission characteristics
Chemical characterization of PM1 emissions from indoor combustion sources using an experimental chamber
Chemical and toxicological properties of particles from ironing
Psychological stress increases human bioeffluent emissions: An experimental assessment
Characterization of emissions from a Crumb Rubber using thermal desorption GC-MS
Time course change of 2-ethyl-1-hexanol and reaction products from PVC sheet and ozone
Development of test methods for evaluation of volatile pollutants emission from cut edge of building materials
The Effect of Negative Pressure on the Indoor VOC and Particle Concentrations
Exposure to fine, ultrafine particles and black carbon in two preschools in Nur-Sultan city of Kazakhstan
The review of state-of-the art methods to determine the emission rate of SVOCs with experimental chambers
Emission of Volatile Byproducts from Activated Carbon Filters
Particle morphology and exposure to trace elements in two preschools in Nur-Sultan city, Kazakhstan
Sources and emissions 1: Formaldehyde and VOCs
Study on VOC partition characteristics of fabrics in indoor thermal and humid environment
Fine particle source tracking in a particle-laden upward jet with a crossflow
Insights into the transfer mechanism of phthalate esters in settled dust on source surface and non-source surface
Photochemical recycling of nitrogen oxides on indoor surfaces
Its Coming From Inside the House! VOC Emissions at HOMEChem
Cleaning chemicals and practices: Effects on air quality and indoor microbiota
Migration of Organophosphorus Flame Retardants from Sources to Settled Dust
Sources and emissions 2: Consumer Products
Particle and Volatile Organic Compound Emissions from 3D Printers and Their Potential Exposure Risks
Temporal dynamics and emission rates of terpenes from essential oil diffusers in a real scale room
Real Consumer Use Patterns of Essential-Oil-Based Household Products: Emission Rate Assessment and Impact on Indoor Air Quality
Characterization of the emissions of isothiazolinones from building and consumer products into indoor air
Formaldehyde emissions from wooden toys: Method comparison and exposure assessment
Chemical pollutant emission from a sleeping person and a carpet
Cognitive Impact of Essential Oil Emissions: Pollutant and Odor Effects
Characterization of particle and VOC emissions from an essential oil diffuser
Sources and emissions 4: Field Studies
Airflow Impact on Vapor Intrusion: Characterization of an Advection Zone of Influence
Observation of dimethyl esters of C4-C6 aliphatic acids in the indoor air of several new apartments in Beijing, China
A Summary of Motion Characteristics of PM2.5 in Rural Houses of Northeast China
Study on Indoor Air Quality Evaluation of Village Buildings in Cold Regions During Winter Heating Period
Contribution to Indoor PM2.5 from Cooking using Field Data Collected from New California Homes
Sources of indoor particulate matter in South African residential communities
Effects of Outdoor Air Temperature on Flush-out in Residential Buildings
Thermal comfort, perceived air quality
Coupling a 65-node thermoregulation model with a data-driven thermal sensation model to forecast Chinese elderlys real-time thermal sensation
Assessment of Indoor Work Environmental Condition in Textile Dyeing and Printing Processing Industry: A Case of Surat city, India
Data-driven method predicting building occupants thermal comfort using the Global Database
Visualized literature analysis on intelligent thermal comfort sensing, predicting, and controlling
Soft, skin-interfaced microfluidic sweat sensors for studying the effect of air condition on sweat generation
Advanced indoor thermal environment control using occupants mean facial skin temperature and clothing level
Performance Evaluation of Radiant Cooling HVAC Systems on Indoor Environmental Parameters and Staff Thermal Comfort
Personal thermal comfort models based on environmental & behavioral data and thermal preference
Effects of Thermal Environment Improvement and Energy Saving in an Apartment House with Window Renovation
Development of autonomic regulation model for cardiovascular system simulations
Interaction Effects of Correlated Color Temperature and Indoor Air Quality on Environmental Perceptions
Space heating or bed heating? A questionnaire survey on use of heating methods during sleep of Chinese residents
Field study on human thermal comfort in household metering in residential building with Central Heating in cold area
Verification of Airflow Control Methods According to Individual Differences in the Development of Combined Convection-Radiation Air Conditioning System
Numerical Simulation of Vortex Structures in a Long-Narrow Enclosed Space
Thermal comfort evaluation in predicted mean vote control with real-time metabolic rate
The Influence of Passive high- insulation Outer Shell Technologies on Indoor Thermal Comfort and Energy Consumption of School Classrooms using Numerical Simulation
Optimization of Sleeping Environment Based on HRV Using Non-Contact Mat Sensor
The Joint Effect of The Draught and the Warm Ceiling on Thermal Comfort
Investigation of the relationship between thermal sensation, sleep deprivation, and human physiological signals
Pre-cooling Operation aiming for Demand Response Adaptation in House
Overheating in the new housing stock in Australia
Analysis of Thermal Comfort of Room Air Conditioners by Field Test
Outliers Detection Method for Thermal Sensation Vote and its Six Influential Factors in Field Survey
Personal thermal comfort model based on machine learning for electric vehicle with local radiant heating condition
Core temperature estimation for thermal comfort monitoring using NIR imaging of hand vein dynamics
A pilot study on perceived thermal comfort in homes with smart control of space heating
Investigation of perceived air quality, occupants behaviour and air pollutant levels in two open-space office buildings in Switzerland
Temperature variability in South African residential communities
Development of a impinging jets ventilation system installed in an office and evaluation of energy consumption and indoor air and comfort quality levels
Effects of airflow velocity on skin temperature and quality of sleep during summer night
Thermal comfort, perceived air quality 1: Natural Ventilation and Air Movement
Field Survey on the Effect of Air Movement on Thermal Comfort in Premises Served by DOAS at Warm Setpoints
An experimental study of the effect of intermittent window opening on the thermal comfort of college student in winter
Optimization of window systems to achieve thermal comfort in the hot and humid climate of Indonesia
Effect of Forced Convection and Buoyancy Driven Flow on Residential Air Velocities
Thermal comfort, perceived air quality 7: Special Applications
Development of radiant floor cooling system using phase change material in the hot and humid climate of Indonesia
Impact of Houseplants on Cognitive Function
Optimal combination of comprehensive physical environmental parameters for sleep quality improvement
Comparison of thermal comfort of vehicle passengers according to gender and age
Achievement of Desired Indoor Conditions in Cleanrooms: Cleanliness in Relation to Thermal Comfort
Integrated impacts of tree planting and street aspect ratios on urban thermal environment in street canyons: A scaled outdoor experiment
Ventilation and HVAC system
Energy Consumption and Indoor Air Quality of Elderly Care Center Using EnergyPlus Simulation
Study on Environment Conscious Technologies at a Super Tall Building: Basic Examination of Dynamic Draft Skin System by Steady CFD Analysis
Selection of the Occupant Window Opening Behaviour Model for Building Performance Simulations: A Comparison of the Window State Model and Window Operation Model
A study on the sealing performance of air curtain with non-linear discharge and suction port on the side walls
A Comparative Study on Indoor Radon Concentrations Affected by Ventilation Rates
Cooling Load Prediction of Subway Station Based on Data Mining
Optimal design of EC Fan Used in an Air Handling Unit (AHU) of HVAC System in a School Building using Numerical Simulation
Thermal Performance of Alternating-Current Heat Recovery Ventilator with Condensation and Evaporation Processes
Assessment of Indoor Particle Removal in an Elementary School Classroom Equipped with a Mechanical Ventilation Unit
Speed-controlled Exhaust Air-Supply Air Heat Pump with Recirculation Air
Building Air Tightness and Natural Ventilations Impact on Ventilation System Energy Consumption of Nearly Zero Energy Buildings
From Theory to Practice - Development of a Model Predictive Anti-Legionella Controller
Preliminary study on natural ventilation efficiency of multi-floors atrium by different opening types of partition in Taiwan Typical Townhouse
Study on the passive strategy of natural ventilation efficiency by vertical opening design of furniture modular in multi-person-cluster in University dormitory
Evaluation of HVAC systems on ships: an axiomatic design approach
Quantitative Comparison of the Operational Properties of VAV, UFAD and Active Chilled Beam-DOAS
Ventilation and HVAC system 2: Energy Efficient Controls
Evaluation of Annual Energy Saving Potential for a New Hybrid Air Conditioning System
Analyzing the Energy-saving Potential of Demand-Controlled Ventilation in Hospitals via Dynamic Building Simulations
Evaluating the cooling capacity of diffuse ceiling ventilation systems for different ratios of perforated area
AHU Discharge Air Temperature Reset Strategy According To Outdoor Air Temperature
Energy Consumption Analysis Comparing Two Types of Air Conditioning Systems in Smart Farm
Model-based Fault Detection and Localization Algorithm for Air Handling Units in Large-Scale Buildings
Integrated Energy Active Windows with Low-Temperature Heating Systems in Cold Climates
Effects of thermal mass on the cooling capacity and surface heat flux of radiant systems under direct solar radiation
Ventilation and HVAC system 3: Natural Ventilation & Infiltration
Developing a new passive tracer gas test for air change rate measurement
Analytical study of natural ventilation in a cylindrical cavity with one end open at the top
Applying machine learning for building natural ventilation control
Field measurement and dynamic simulation on the energy loss thorough door open while air conditioner running in a commercial store
Modification of predicting parameters of occupants window opening behaviour in residential buildings using Machine learning algorithm
Measurement of air change rate in single-sided building by Scale-model outdoor experiments
Ventilation and HVAC system 5: Transmission & Distribution
Numerical Evaluations of a Multiple 3D Particle Tracking Velocimetry System for Indoor Air Flow Study
Optimal Control of Indoor Air Temperature, Humidity and Airborne Pollutant Concentrations
A fast-response quartz-enhanced photoacoustic spectroscopy SF6 sensor for measuring contaminant transport
Determining inter-zonal flow rates using passive sampling of tracer gases
Exposure to metabolic CO2 in a room with different air distributions
Numerical simulation of the underfloor air distribution system using the different boundary temperature conditions
Ventilation and HVAC system 7: Residential Ventilation
Determination of direct capture efficiency for residential range hoods
Energy flexibility of residential buildings using a novel multi-zone demand controlled ventilation and heating system
Collection of Experiences with Mechanical Ventilation in Renovated Apartment Buildings
Ventilation measurements and CO2 exposure during sleep - How important is where you measure CO2 in a bedroom?
Comparison of PFT and CO2 Estimates of Air Exchange Rates in an Apartment
Corporate and Other Organizational Members
Any reference obtained from this Website to a Corporate/Other Organizational Member does not constitute or imply an endorsement by ISIAQ of the product, process, or service, of its producer or provider. The views and opinions expressed by any Corporate Members do not necessarily state or reflect those of ISIAQ.
Sani Service Logo